eobdtool

SKP1000 User Manual

11:36, 7/08/2017, Royaume-Uni .. 0 commentaires .. Lien
Mots clefs :

Programming process: the following conditions to increase or replace the SKP1000 key programming; system failure.

Steps:

● The driver's side door is open and the car key is not in the ignition switch;

● Insert the car key into the ignition switch and pull out the key;

● Turn off and open the driver's door twice in 40 seconds;

● Close the driver's door;

● Insert the car key into the ignition switch;

● Turn on and off the ignition switch once, skp1000 program a new key number in a new car key, and save the old number in the car key or turn on and off the ignition switch twice so that it can be used in a new car key In the program into a new key number, at the same time delete the car keys stored in the old number;

● Remove the car keys;

● The door will now be automatically locked and unlocked once or twice, as to one or two depending on the mode of the vehicle key selection;

 

Complete the following SKP1000 car keys in 20 seconds Operation steps:

● Press the lock and unlock button of the car key at the same time and keep it for 1 ~ 1.5 seconds.

● Press the lock button for at least 1 second in the next 3 seconds, release the button.

● The door will now be automatically by skp1000 programmer locked and unlocked once.

● The door will be automatically locked and unlocked once


Ajouter un commentaire

{ Page précédente } { Page 29 sur 51 } { Page suivante }

Qui suis-je ?

Accueil
Qui suis-je ?
Mon itinéraire
Livre d'or
Archives
Amis
Album photos

Mes albums

Où suis-je actuellement ?



Rubriques


Derniers articles

Note sur le nouveau VAS 5054A & VAS 6154 V4.23
Sans titre
Lancement X431 PRO3 Foire aux questions
Comment utiliser XTOOL VAG401 pour faire échouer XTOOL Park Assist
Porsche Cayenne key programming by Lonsdor K518ISE
Processus sur Comment diagnostiquer Audi par XTOOL PS2
Infos sur la nouvelle arrivée Lonsdor K518ISE Key Programmer
Une expérience pour trouver le téléchargement du logiciel BMW Scanner V1.4.0
Quoi de neuf sur XTOOL EZ400 Pro
Quoi de neuf sur XTOOL EZ400 Pro

Sites favoris


Amis